AIRGAP Distribution System

Part Number: 400-05021
AirGap Whitepaper Download

This product is designed for customers who need to transfer data between networks that cannot be connected directly together thereby preserving the network "Air-Gap" between systems.  This system will accommodate up to six high-side systems and up to six low-side systems.  It uses six industry standard SATA DOS formatted (32GB available) hard drives.  Each hard drive can be connected to any high or low-side port using six (included) USB A-B patch cables.

• Consists of 6 USB accessible hard drives and two sets of 6 cable connectors, six for high side computers and six for low side computers.

• Each SATA type hard drive, located on the rear of the unit, is mounted in a removable housing with a key lock that allows for hot swapping the drives.

• Using a patch cord the user can connect any of the high/low side computers to any of the six hard drives, download the information desired, move the patch cord to the desired destination computer, pull the files off, and then erase the copies on the hard drive.

• High and low side ports are USB 'A' type connectors, the internal hard drives are USB 'B' type connectors.  The patch cables consist of USB 'A' connectors on one end and USB 'B' connectors on the other end which eliminates the possibility of tying any two computers together.

• The actual computer connections (USB Extenders) are made at the rear panel then routed to the front panel connectors internally. This lowers the clutter and confusion on the front panel.

• Each internal drive has an activity light on the front panel which aids in troubleshooting.

• The chassis is 12 deep by 17 wide by 7 high (4U), includes a single internal 110/220 Volt power supply, removable rack-mount ears, and rear power switch.